Mastercool 55900 IntellaSense II Refrigerant Leak Detector

Meets and exceeds J2791 (R134a), J2913 (R1234yf) and EN 14624 At the heart of this leak detector is a new low power metal oxide gas sensor with superior performance properties such as lower current consumption and sensor longevity.

• The sensor is characterized by high sensitivity and fast response upon detecting the presence of extremely small levels of chlorofluorocarbon gases. F
• Powerful microprocessor was integrated into the design that automatically selects the best operating condition for the sensor to ensure optimum performance throughout the life of the sensor.
• Sensing Element: Heated Tin Oxide Element
• Sensor Life: 2000 hours
• Refrigerants: Detects all refrigerants (HFC, CFC, HCFC, and blends).
• Sensitivity Levels: HIGH : 0.15 oz/yr (4 g/yr), MEDIUM: 0.25 oz/yr (7 g/yr), LOW: 0.50 oz/yr (14g/yr)
• Response Time: less than 1 second
• Battery: 2 C Alkaline 6000 mAh batteries
• Operating Temperature Range: 0?F to 120?F Probe:
• Intelligent tip, with environment sensing element to eliminate the potential of false alarms.
• Flexible 15.5 inch probe length for difficult to reach locations. Display: Six vertical LEDs enabled selectively (red, yellow or green) to display the following information to the user such as:
• The relative signal level of the detected leak
• The selected sensitivity range (low/medium or high) of the unit
• The gain of the unit (low gain or high gain )
• Diagnostic information : low battery, interference/wait, contaminated atmosphere readiness of the unit or fault conditions of the unit Keypad Controls:
• ON/OFF button (push-on/push-off)
• Volume/Mute button (high, low or mute)
• Sensitivity button for High, Medium and Low sensitivity level selection
• Peak button when multiple leaks are suspected (push enable/disable)