Mitutoyo 500-182-30 Digimatic (Digital) AOS Caliper ‘MyCAL ABSOLUTE’ 0-200mm

Precision is our Profession

Mitutoyo 500-152-30 Digimatic (Digital) AOS Caliper ‘MyCAL ABSOLUTE’ 0-200mm
SERIES 500 with exclusive ABSOLUTE Encoder Technology

A built-in ABS (absolute) scale means that these calipers are ready to use immediately
after power-on without origin resetting – just like using a Verniercaliper .

• Range: 0-200mm (Metric)
  
• Graduation: 0.01mm

This digimatic caliper allows you to take reliable measurements and offers you the following benefits:

• AOS (Advanced Onsite Sensor) induction type encoder used in top-of-the-line ABS coolant-proof calipers
• Thanks to the adoption of the electromagnetic induction type ABS encoder, this caliper can be used without concern for contamination on the scale face during measurement. Detection signal is not affected by dirt (water, oil, etc.) on surface of a scale.
• ABS (ABSOLUTE) scale requires no origin setting after power-on and has no limit to response speed.

Technical Data

Function

• Absolute measurement: After power is turned ON,measurement can be started without zero-setting if origin-setting was previously performed. The Absolute origin position can be changed by the ORIGIN button.

• Incremental measurement: Display can be set to zero at any arbitrary position for comparative measurements

• Low-voltage alert: If the battery voltage becomes low, a “B” appears in the display to alert the user before measurement is no longer possible. A battery change advisory alert precedes this alert.

• Data output By using the connecting cable (option), measurement data can be output.

• Data hold: By using the data hold unit (option), the displayed value can be held. This cannot be used with the data output function.

*Certificate of Inspection and Calibration is available by request with for a fee.