Makita GRH08M1W 40V max XGT Brushless Cordless 13/16″ SDSPLUS AVT Rotary Hammer Kit w/Dust Extractor, AFT, AWS Capable (4.0Ah)

The 40V max XGT Brushless Cordless 1-3/16″ AVT Rotary Hammer Kit w/ Dust Extractor accepts SDS-PLUS bits, AFT, AWS Capable (model GRH08M1W) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord.The GRH08M1W is powered by a 40V max battery with a Makita-built brushless motor that combines to deliver the power and performance required for heavy-load applications. It can deliver up to 135 of 3/8″ holes using a fully charged 40V XGT 4.0Ah battery*. The variable speed dial and trigger enable the user to match the speed to the application. This hard-hitting performance is combined with advanced comfort and convenience features including Active Feedback-Sensing Technology (AFT), which electronically turns off the motor if the bit rotation is suddenly forced to stop. It is also equipped with Anti-Vibration Technology (AVT) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle are engineered to further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT) is engineered for improved dust and water resistance.The GRH08M1W has dust extraction capability and is OSHA Table 1 compliant with an on-board HEPA Dust Extractor or stand-alone AWS Extractor options. For added efficiency, the Rotary Hammer is equipped with Auto-Start Wireless System (AWS), which uses Bluetooth technology for wireless power-on and power-off communication between the equipped tool and dust extractor (sold separately). Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.Constant speed control automatically applies additional power under load for optimum performance. The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs.Additional performance features include an electric brake, a built-in L.E.D. light, and an ergonomic soft-grip handle with a large 2-finger trigger that provides increased comfort on the job. It also features a retractable hook that allows the tool to be secured when not in use. It has 3-modes of operation “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications. The GRH08M1W is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-PLUS bits.XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart, and outlast the rest.*Tested 2-3/8″ deep holes in 5,000 PSI concrete

Key Features

• POWER : Brushless motor along with 40V max XGT battery combine to deliver the power for heavy application
• CONTROL : AFT electronically turns off the motor if rotation of bit is suddenly forced to stop
• COMFORT : AVT is a counterbalance system along with vibration-absorbing handles that work to reduce vibration
• DUST MANAGEMENT : Dust extraction capability with OSHA Table 1 compliant on-board HEPA Dust Extractor
• INCLUDES : (1) 40V max XGT Lithium-Ion 4.0Ah battery, charger, dust extractor, side handle, grease, towel, tool bag

Features

• OUT POWER: Makita-built brushless motor along with 40V max XGT battery combine to deliver the power and performance required for heavy-load applications
• OUT SMART: Constant speed control automatically applies additional power under load for optimum performance
• OUT LAST: Overload protection is designed to protect the motor from burnout in abnormally high torque situations
• XGT technology delivers up to 135 of 3/8″ holes using a fully charged 40V XGT 4.0Ah battery*
• Active Feedback-Sensing Technology (AFT) electronically turns off the motor if rotation of bit is suddenly forced to stop
• Anti-Vibration Technology (AVT) is an internal counterbalance system along with vibration-absorbing handles that work together to reduce vibration
• Dust extraction capability with OSHA Table 1 compliant on-board HEPA Dust Extractor or stand-alone AWS Extractor options
• Auto-Start Wireless System (AWS) which utilizes Bluetooth technology for wireless power-on/off communication between tool and dust extractor (AWS Transmitter sold separately)
• Electric brake allows the tool to be repositioned faster for maximum productivity
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears during a bind-up situation
• Variable speed dial and trigger enables user to match the speed to the application
• Built-in L.E.D. light with an independent on/off illuminates the work area
• Ergonomic soft-grip handle and large 2-finger trigger provide increased comfort on the job
• 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
• Retractable tool hook secures the tool when not in use
• Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
• XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
• The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
• The XGT Rapid Chargers digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT Rapid Chargers built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• 40V max XGT Lithium-Ion 4.0Ah Battery (BL4040) reaches a full charge in 45 minutes or less
• Compatible with Makita 40V max XGT Lithium-Ion Batteries
• Only use genuine Makita batteries and chargers
• 3-year limited warranty on tool, battery and charger
• *Tested 2-3/8″ deep holes in 5,000 PSI concrete

Additional Information

Max. Capacity (concrete drilling) : 1-3/16″Optimum Range (concrete drilling) : 3/16″ – 3/4″Impact Energy (ft.lbs.) : 2.9Impact Energy (Joules) : 3.9 JBlows Per Minute (variable speed) : 0 – 4,500 BPMNo Load Speed (variable speed) : 0 – 840 RPM