Makita GPH01D 40V max XGT Brushless Cordless 1/2″ Hammer DriverDrill Kit (2.5Ah)

The 40V max XGT Brushless Cordless Hammer Driver-Drill (GPH01D) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry.The GPH01D is powered by a Makita-built brushless motor that delivers 1,250 in.lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers up to 35% faster drilling speed, compared to Makitas 18V LXT Cordless Hammer Driver-Drill (XPH07), with two speed settings (0-650 and 0-2,600 RPM and 0-9,750 and 0-39,000 BPM). An ultra-smooth variable speed trigger provides optimum control.An electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed). Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop.The GPH01D is a workhorse tool engineered to outlast with Extreme Protection Technology (XPT) to provide increased dust and water resistance in harsh jobsite conditions. A reinforced gear housing and all-metal chuck provide additional durability. XGT is a system of equipment, tools, batteries and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

Key Features

• POWER : Makita-built brushless motor delivers 1,250 in.lbs. of Max Torque
• INNOVATION : Electronic digital clutch (41 settings in low speed, 21 settings in high speed)
• VERSATILITY : 2 speed settings (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM)
• DURABILITY : XPT is engineered to provide increased dust and water resistance in harsh job site conditions
• INCLUDES : (2) 40 max XGT batteries, rapid charger and bag

Features

• OUTPOWER: Makita-built brushless motor delivers 1,250 in.lbs. of Max Torque; out powers similar models in heavy-load applications
• OUTSMART: Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
• OUTLAST: XPT is engineered to provide increased dust and water resistance in harsh job site conditions
• Active Feedback-sensing Technology (AFT) turns the motor off if rotation of the accessory is suddenly forced to stop
• Up to 35% faster drilling speed with 2 speed settings (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM)*
• Compact length at only 7-1/8″; ideal for working in tight spaces
• Ultra-smooth variable speed trigger provides optimum control
• Reinforced gear housing engineered for maximum job site durability
• All-metal chuck for increased job site durability
• Hammer-drill mode applies a percussive motion for drilling holes in concrete or masonry
• The digital communication within XGT optimizes performance to provide up to 2X longer sustained power under heavy-load applications
• The digital communication within XGT actively monitors and protects against overload, over-discharge and overheating
• XGT Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
• XGT Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
• The XGT Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
• The XGT Rapid Chargers digital display indicates battery charge level (-80%, +80%, 100%)
• The XGT Rapid Chargers built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
• 40V max XGT Lithium-Ion 2.5Ah Battery reaches a full charge in 28 minutes or less
• Compatible with Makita 40V max XGT Lithium-Ion Batteries
• Only use genuine Makita Batteries and Chargers
• 3-year limited warranty on tool, battery and charger
• *Compared to XPH07

Additional Information

Chuck Size : 1/2″No Load Speed (var. 2 spd) : 0 – 650 / 0 – 2,600 RPMBlows Per Minute (2 speed) : 0 – 9,750 / 0 – 39,000 BPMMaximum Torque (in.lbs.) : 1,250 in.lbs.Net Weight (with battery) : 6 lbs.System : 40V max XGTCapacity (steel) : 13/